微软 Windows Server R2 VL with Update (x64) DVD MSDN 原版镜像下载 - 大眼仔旭.Windows Server のインストール、アップグレード、または移行 | Microsoft Learn
Looking for:
Windows server 2012 r2 datacenter with update 64-bit 自由 - |
Windows server 2012 r2 datacenter with update 64-bit 自由
Make sure them installation sources are valid and restart the installation. I have downloaded the media twice from Microsoft thinking the first might have been corrupted and still no joy. I really do not relish rebuilding the server since I need it asap for a virtual machine deployment that was exported from R2 by a vendor and will not import to Confused here.
You say you have a virtual machine. Is this Datacenter that was exported froma R2 host? Change the Windows Image to a Higher Edition Using DISM. The vendor sent me a virtual appliance virtual machine that was exported from Server R2.
My Hyper-V server is , so it will not import the R2 exported machine. I just found a workaround by setting up my own new virtual machine and just using the vhd that was part of the package sent by the vendor. It appears to be working. It is a SUSE Linux virtual machine, so I just had to set a Legacy Network Adapter per the vendor.
I was using the ISO from Microsoft and installing from the setup executable. It looked normal except it never asked for the key, just skipped ahead to the version choice and then errored out. I will try the DISM method if I run into any issues. I guess they did not offer that method for Server installations. I asked, but got no real good answer from them about the possibility.
Just using the vhd they provided seems to be working though. I think from now on I will just wait for the R2 version and skip buying the first one that comes out.
R2 really should be a free upgrade, in my humble opinion. The table below briefly summarizes which already licensed that is, not evaluation Windows operating systems can be upgraded to which editions of Windows Server R2. Note the following general guidelines for supported paths:. Upgrades that switch from a Server Core installation to the Server with a GUI mode of Windows Server R2 in one step and vice versa are not supported. However, after upgrade is complete, Windows Server R2 allows you to switch freely between Server Core and Server with a GUI modes.
According to TechNet, there is no update path from to R2. You have to upgrade using R2 media. That article says in the table that if you are running Datacenter, you can upgrade to R2 Datacenter, unless I am missing something. I got the virtual machine created and attached the vhd file from the vendor's exported machine.
It is working fine now, with the one event that is looking for different integrated tools. There were additions to R2 that are not in If R2 is what you need and you don't have existing licensing, this is your ticket. My first post says in-place upgrade, not update.
Your post said that there was no in-place upgrade path. So you do have a license, then why not insert that media, and perform the upgrade to R2, configure hyper-v and then import your VM? Are you downloading the media as an eval or from your MSVLSC account? Actually no, I'm not messing with you. Just trying to fully understand exactly what the problem is here. You also didn't answer whether this was an eval download from Microsoft or if it was from your volume license service center account.
Okay, just to make sure I'm on the same page here since you think I'm just messing with you The only virtual machine requirement was a Legacy NIC added as the primary virtual NIC Linux requirement? I had seen this article, but my host machine has 16GB of ram so it wouldn't apply.
The license error message really has me stumped. I re-downloaded the ISO thinking it might have been corrupt. Still got the error.
Maybe an Hewlett-Packard driver issue? I am upgrading a HP DL G7 server. Pretty standard machine. So this Linux VM guest will not boot correct? If that's the case, have you tried removing all network adapters from the config and then try booting it? The Linux VM is working, but there is a Hyper-V event where it is looking for integrated tools of a lower version. The VM is working fine, so far Okay this goes back to something I mentioned earlier. You should be able to remove the current integration tools and replace them with the older one from your host.
The VM is working. I don't have to make any changes there if I can perform the in-place upgrade to R png . I am sensing no way around this issue, so it looks like a complete wipe and reinstall. Nice Microsoft Simply that whilst the LICENSING allows for an upgrade there is no media or software install to execute that upgrade.
It is a fresh install. If you know of an update that allows one to go from to R2 I would love a link to it because it'll save me rebuilding about 50 servers. I have a R2 key and license. It won't even get that far into the UPGRADE process. I can't be the only one with this issue. I have performed in place upgrades without issue before.
This is the first time it has failed. Even Microsoft says it should work. The Windows Datacenter is the full licensed version. I now have a R2 licensed version that I wanted to perform the in place upgrade to avoid reinstalling management software. We gave up after trying to upgrade per Microsoft's instructions and will perform the full clean install of R2 Datacenter this afternoon. Who knew a licensing terms issue would stop the process even before getting to enter the license key for the upgrade.
Oh well This topic has been locked by an administrator and is no longer open for commenting. To continue this discussion, please ask a new question. So, I just got hired as an "IT Specialist" at a non-profit.
I have little networking experience outside of installing switches, etc. They did not have a IT person before me. I am starting mostly starting from scratch. What I would like This is a big brother issue, I think.
But the higher-ups want to see network activity of someone connected to the vpn. This is to see if they are working on the servers or not. Can this be done? We use OpenVPN server and a Sonicwall on the WAN. In this series, we take questions that may be difficult for you to bring up in public and ask the Spiceworks Community on your behalf to give you the anonymity you want to find the answers you need. Send an email to news spiceworks. to all you deserving Spiceheads.
Just a reminder, if you are reading the Spark! We like it spi Your daily dose of tech news, in brief. Welcome to today's Snap! Flashback: Back on October 18, , Ne Online Events. Login Join. Home Windows Windows Server Server Datacenter to Server R2 In Place Upgrade Posted by smkornegay Windows Server. Any ideas? Spice 5 Reply flag Report. smkornegay This person is a verified professional.
Comments
Post a Comment